170V - 454V 100kw AC Brushless Generator Double Bearing Single /
- 80kw to 200kw double bearing brushless alternator for diesel
- Self-exciter with AVR SX440
- Stator and rotor with 100% copper wire by American Essex
- Bearings meets C&U international standard
- IP23 enclosure
- Insulation class H
Thank you for visiting Jiangsu Farrand Generator Technology CO.,
Ltd,brought to you general power.
With few years of experienced in the Power generation industry.We
have good repution in the market.Our company specializes in
distribution and export of:
- brushless alternator from 6.5kw to 1000kw
All interface according to international standard, and matches all
world famous generator set in the world. Such as Cummins, Deutz,
MTU, Derkins, Volvo ect.
In order to provide good service to you,we relies on:
- Low MOQ:It can meet your promotional business very well.
- OEM Accepted:We can match any your samples.
- Good service:We treat clients as friend.
- Good quality:We have strict quality control system.
- Fast & Cheap Delivery:We have big discount from forwarder,we
have contract for a long time.
With a well established and growing customer,we currently/recently
have served customer countries such as
Arabia,South Africa,South Korea,Turkey,UK,USA,Venezuela,etc.
We thank you once again for visiting our website,we hope it has
been useful and clearly presented and we take this opportunity to
remind you we remain at your service.Please do not hesitate to
contact us.we appreciate you,you are the reason we are here.Thank
you for choosing Farrand Generator,power generation solution.
Brushless AC generator, suitable for operation at 1500 /1800RPM,
170V and up to 454 Volts, 0.8 pf (lag) suitable for 50 Hz
&60Hz, 3 phase & 1 phase, 4 wire system. The alternator is
designed and built to withstand tropical conditions. The alternator
generally conforms to IEC 34-1/34-2 , BS 4999/5000 and IS:
4722-2001 with enclosures rating IP 23 is the standard version,
satisfying IEC 34-5/IS : 4691/DIN VDE 0530-5 requirements. The
Alternator is dynamically balanced , brushless type, screen
protected, revolving field, self excited, self regulated through an
AVR. The alternator has the following features:
1. +- 1.0 % Voltage regulation (max.) in static conditions
2. IP: 23 protection with insulation class H
3. Permissible overload of 10% for one hour in 12 hours of
The generators have been designed for use in a maximum ambient
temperature of 40℃ and altitude less than 1000M above sea level.
Arranges in order all voltages may obtain from the single wide
wingding ,also namely(three -phase) and 4(single -phase)
reorganizes through 12 terminals may obtain.
Purchasing a FLD 274Series from us will include the following
specification at no additional cost:
>· >4 Poles
>· >Single Phase or three phase
>· >power factor 0.8 or 1.0
>· >1800rpm or 1500rpm
>· >60hz or 50hz
>· >Available voltage from 170v and up to 454v
>· >4 lead alternator
>· >Class H insulation
>· >IP23 enclosure
>· >High efficiency
>· >SX440 Automatic Voltage Regulator
>· >MX341 Automatic Voltage Regulator with PMG
1. Optional permanent magnetic alternator , provide invariable
excitation in any situation.
2. Easy to be connected with power network or other alternators.
Standard 2/3pitch windings avoid excessive neutral current.
3. Dynamically balanced rotors, with single or two sealed ball
4. Simple installation and maintenance with easy access to
terminals, rotating diodes and coupling bolts.
5. Wide range of flange adaptor and single bearing coupling disc.
6. Built to conform to all leading industrial standards.
The advantage of our material:
>· >The rotors and stators with 100% copper wire.
>· >The enamelled wire is Essex by America.
>· >The silicon steel sheet we use is the products of Wugang Brand,800
Series.which is the most famous manufacture of steel.And its
advantage is its magnetic flux is large and its iron loss is small.
>· >The main frame of the alternator and lead box are made of steel,the
end cover is made of high strength cast iron.
>· >All the components of our factory,the stator,rotor and excitation
will be dipping lacquer twice.
>· >The rope of best nylon to be used in all the rotors and stators.We
promise the security of our products,the phenomenon of ribbon burst
will never happen.
>· >The TWB bearings are useing in our products.
>· >All the rotors should be tested by dynamic balance of Germany to go
on test of balance. All the products should be tested by
specialized Test Room.
>· >Sample time:According to your design,a sample time is 5 days.If we
have in stock,the delivery time less than 5 days.
>· >Sample charge:It depending on the weight ,measure,destination,etc.
General Order Information:
We take great pride in our work and in the wide variety of products
that we offer. Our goods have been enjoyed great reputation at US
market, European market and Mid-EAST market .Please be aware that
our production lead times depend on specific items and item
quantities. Our success has been based
on our understanding of the demands and nature of promotional and
marketing deadlines. That's
why we always ensure that every order is delivered on time.